I've a foundation wall that is not flush with the wall sheathing. When we set up z-flashing, in some locations the z-flashing will stick out one/two" earlier the concrete and some destinations, It will be flush.
I have a 30ft by 50ft new store as well as contractor Permit the concrete set up on him before he got it finished easy. How to proceed? - dan
Andy, you will need to cleanse the surface and remove any loose dust, Filth, debris, paints, and or sealers. The fabric that you must use may be the Sakrete Rapidly Environment Cement Patcher. Abide by our Recommendations over a slurry coat application and utilize a skinny layer for the surface and permit that layer to dry. The moment it is dry, thirty minutes to one hour, blend the fabric to the appropriate consistency and implement to the hole.
Nikolay, we suggest working with Sakrete Best ‘N Bond for this repair. It is important that you start by correctly prep the world by getting rid of any bond breakers for example paint, stain, unfastened substance, Filth, dust, oil, and many others. Sakrete Top ‘N Bond is really a polymer modified resurfacing materials which can be employed from ½” right down to a feathered edge.
Dennis, Sakrete Sand Mix modified with Sakrete Bonder and Fortified (to be a bonding agent/primer and admixture) can be employed for applications approximately 2” and right down to ½”. Sakrete Top ‘N Bond can be a polymer modified resurfacing substance that could be utilised from ½” right down to a feathered edge.
Mark, however there's no way to tell if a crack is Lively or will return once patched. Since the slab the steps are sitting on is deteriorating you may want to consider eliminating the slab all alongside one another and starting from scratch.
Bob and Greg, you could possibly use the Sakrete Sand Mix modified with the Sakrete Bonder & Fortifier to cap that slab. You will want to ensure that the slab features a rough surface and clear it to get rid of any free Grime, dust, debris, paint, and or sealers.
I want to switch a sidewalk all-around my house because it slopes back into the slab rather than absent. You'll find foundation repair pillars in several of the sidewalk 'sections', that also slope toward the slab a little bit.
Bob, yes try this website it can be done but It might be considered a absolutely free float over the existing slab. You need to also keep in mind that you do not desire to degree the area; it's got to have a 1/4" for each foot pitch absent from the house for proper drainage. If you level it Then you really will wind up with standing water from the house and it will rot you seals. With a thickness two" and increased you would need to make use of a concrete combine and implement a bonding agent. The surface would have to be thoroughly clean and free of any unfastened materials, dust, debris, paints, sealers, and oils.
Ron, no you cannot utilize the Major N Bond to resurface a swimming pool. You will need to make use of a compatible merchandise that will perform with the existing pool surface. You could potentially Check out with a local pool offer store. - Lee-Specialized Service
Rick, the largest issue will be the oil stains. You need to attempt to find the oil up without applying solvents. A solvent based cleaner will only break down the oil and waterproofing concrete block walls trigger it to leech further more into your concrete. Use oil dry materials to tug it out from the concrete for better success and afterwards clean up with a detergent based concrete cleaner. In the event the stains nonetheless bead up and Should the oil is just too deep then you'll need to grind the surface until finally the oil is eradicated. When the spills are taken care of then it will rely upon the depth with the repair that you're still left with to select which products to work with.
I've a concrete wall which includes indentations in which a metallic fence submit sits now partly filling the void from a 4x4 cedar article which i experienced to remove. About this indentations is an additional indentation one.5" deep in which 2x8 form boards were positioned to carry the cedar posts in the event the wall was poured.
i have had some do the job accomplished around my house about the patio. once they changed the patio they in no way poured the concrete to the previous peak now it seems like crap against the bricks on my house.
i have a handicap ramp that is not been sloped appropriate an ought to pour over The full ramp to re slope from 1 inch to one /eight of the inch would this be an excellent product to make use of will it keep on the slope explanation or will it just movement down hill Otherwise is it possible to advise an item also the place am i able to acquire this my jobs in palm desert california.